------------- Legal Notices ------------- Copyright 1997, Intergraph Corporation. All rights reserved. Including software, file formats, and audio-visual displays; may be used pursuant to applicable software license agreement; contains confidential and proprietary information of Intergraph and/or third parties which is protected by copyright and trade secret law and may not be provided or otherwise made available without proper authorization. Restricted Rights Legend Use duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c) (1) and (2) of Commercial Computer Software -- Restricted Rights at 48 CFR 52.227-19, as applicable. Unpublished -- rights reserved under the copyright laws of the United States. -------------------- End of Legal Notices -------------------- ------------------- Version Information ------------------- Product: Intense 3D 100 Number: SHBY110AC-0403A Version: 04.03.31.30 Date: August, 19, 1997 Description: BIOS 103A for the Intense 3D 100 Graphics Card -------------------------- End of Version Information -------------------------- ------------------------------ System Requirements ------------------------------ • IBM PC or compatible • Pentium processor • 8 MB or higher • PCI bus slot • Windows® 95 • CD-ROM drive -------------------------- End of System Requirements -------------------------- -------------------------- BIOS FIXES -------------------------- - Refresh Rate too high on Rendition Ready games fixed/ - Fixed a font problem with certain languages (Swedish, Korean, etc.) - Video is blanked during Speedy3D startup - TR # 289603142, 289603315, 289603344 - Fixed Win95 loss of sync at boot. BROWN OUT!!!! - Fixed DDC under Win95 for HCL/HCT test @ MS WHQL. - Fixed mode switching bug when in high refresh - Fixed DDC related problem causing loss of sync during win95 startup using NEC XE17 monitor. -------------------------- End of BIOS FIXES -------------------------- --------------------------------- Installing Intense 3D 100 BIOS 103A --------------------------------- - Shut down windows and restart the computer in DOS mode. - Change the current directory to the drive and directory containing the program RFLASH4.EXE and your new BIOS file. The BIOS file is named INGR103A.ROM - Type "RFLASH4 INGR103A.ROM" After the command executes, you will see the prompt return. Do not be concerned if at this point you see some garbled characters. You must reboot the system. As the system reboots, you will see a message that displays the version number of the BIOS just installed. This number will be shown as "1.02.103". ---------------------------------------- End of Installing Intense 3D 100 BIOS 103A ---------------------------------------- ------------- Documentation ------------- A customer installation Guide is provided in the Intense 3D 100 kit. Refer to Microsoft’s Windows 95 documentation and Help for more information on installing drivers, software applications, and configuring your computer’s video display. -------------------- End of Documentation -------------------- --------------------------- Customer Support --------------------------- Finding Intergraph on the Internet You can find Intergraph on the Internet in the following ways: If you have a World Wide Web browser, use it to visit http://www.intergraph.com. For Intense 3D 100 information and software, visit http://www.intergraph.com/ics/I3D100. If you have a File Transfer Protocol (FTP) program, connect to Intergraph at ftp.intergraph.com. For Intense 3D 100 information and software, go to bbs/consumer/reactor. If you have a Gopher program, connect to Intergraph at gopher.intergraph.com. For Intense 3D 100 information and software, go to bbs/consumer/reactor. You can get information from Intergraph’s email server at info@intergraph.com. Put help in the body of the message (the subject line is ignored) to get information on such subjects as Intergraph’s online services and where to get World Wide Web browsers. Using the Intergraph Bulletin Board Service Available 24 hours a day, 7 days a week, the Intergraph Bulletin Board Service (IBBS) is an electronic forum for Intergraph customers to exchange information with Intergraph's technical and marketing staff, and with other Intergraph customers. You can use the IBBS to get technical support information, documentation and training information, programs, and software updates and fixes. The IBBS is also available for you to give suggestions, make inquiries, and report problems. To connect to the IBBS: 1. Set your system’s communications protocol for eight (8) data bits, no parity, one (1) stop bit, and any baud rate up to 14,400. 2. Using a modem, dial the IBBS number, 1-205-730-8786. You can dial 1-205-730-6504 if you are using a 2,400 baud connection. 3. When connected, respond to the login request by keying in your user ID. If you have not connected before, key in new to create a user ID. 4. Follow the menus to find what you need. If you are new to computer bulletin boards, the IBBS provides clear choices and plenty of online help. A text file that explains IBBS commands and organization is available for you to download. For Intense 3D 100 information, go to I -- W -- F. If you have trouble connecting to or using the IBBS, log a problem through the Intergraph Customer Response Center (product entry IBBS), send a fax to 1-205-730-1110, or leave a message for the System Operator (Sysop) at 1-205-730-1413. Getting Telephone Support If you can’t find what you need in this document, on one of Intergraph’s Internet sites , or through the FAXLink, you can call the Customer Response Center at 1-800-226-4891 during these periods: Monday through Friday, 7:00 a.m. to 7:00 p.m. Central Time (except holidays) Saturdays, 9:00 a.m. to 6:00 p.m. Central Time (except holidays) Have the following information readily available when you call: The product’s name (Intense 3D 100). Your name and telephone number. A brief description of the question or problem. System Information - System Vendor & Model # or Motherboard Vendor & Chip Set Manufacturer of System BIOS & Version # Getting Warranty Service To obtain warranty service, contact the original place of purchase to determine if your Intense 3D 100 board is covered within their warranty period. If the place of purchase warranty period has expired, your extended warranty period is covered by Intergraph. Refer to the warranty statement at the beginning of this document for details. To obtain warranty service from Intergraph, you must return the Intense 3D 100 board in its original packaging, along with proof of purchase showing the purchase date, and the warranty card (found at the beginning of Installation Guide). You must bear shipping, packaging, and insurance costs for delivering the Intense 3D 100 board to Intergraph. Intergraph will provide return shipment to you. Ship the Intense 3D 100 board to: Intergraph Corporation Intense 3D 100 Repair Center 9805 Kellner Road Huntsville Alabama 35894-0001 (205)730-5599 ---------------------- End of Customer Support -----------------------